The trucks that you have on your skateboard drastically affects the way your board rides. For those of you who aren’t familiar with skateboards, trucks are the T-shaped metal pieces that mount to the bottom of your skateboard.
There are two trucks on each board. The wheels and bearings attach to the trucks securing them to the deck. They are one of the key components you need to build your skateboard.
Best Skateboard Trucks In 2020 – The Top Picks
Now that you have more of an idea what a skateboard truck is, here is a list of the top 10 trucks in 2020 that I’m going to review:
Independent Forged Titanium Stage 11
|139 (8" Axle)|
149 (8.5" Axle)
169 (9.125" Axle)
|7.75", 8", 8.75" Axle||Aluminium||0.65 lb||pair|
Thunder Polish Hi
|7.75", 8" Axle||Aluminium||0.85 lb||pair|
|7.75", 8", 8.5" Axle||Steel||1 lb||pair|
Independent Raw Stage 11
|129 (7.75" Axle)|
139 (8" Axle)
149 (8.5" Axle)
159 (8.75" Axle)
169 (9.125" Axle)
|5" (7.75" Axle)||Steel||1 lb||pair|
Tracker Slalom RTS
|106, 139, 149 mm||Steel||1 lb||single|
Independent Skateboard St.11
|5.25" (8" Axle)||Steel||1 lb||pair|
Tensor Truck Package
|Trucks 5" (7.75" Axle)|
Wheels - 52 mm
Bearings - Bullseye ABEC 9
Hardware - Shorty's 1"
|Steel||3 lb, set||set|
Owlsome Combo Set
|5" (7.75" Axle)||Aluminium||2.6 lb, set||set|
1. Independent Forged Titanium Stage 11 – the Most Durable skateboard trucks
These Independent Forged Titanium Stage 11 skateboard trucks are ultra lightweight for skaters wanting the highest strength-to-weight ratio that’s available. These durable tracks reduce the weight of your board without losing any performance. They offer superior turning and stability, improved grind clearance, better no hang-up yoke for grinding tricks, and reduced wheel bite. They will last longer and are stronger than any titanium truck available.
- Includes 2 trucks
- Size 139, 149 and 169
- 8.0” axle – for use with boards between 7.75” and 8.25”
- Height of 53.5mm
- Weighs 323g
- Mid-sized trucks
- 90a bushings
Independent is one of the top names in skateboarding because they make products like these. Period.
2. Thunder Sonora – Style and Dependability
These Thunder Trucks Sonora skateboard trucks offer great turning response in a lightweight and durable truck that’s guaranteed for life. Great looking design.
- Thunder size 147 Hi
- 8.0” axle for use on boards between 7.9” and 8.25”
- Height of 49.78mm
- Set of 2 trucks
- Made in the USA
Good quality product with great style and a small price tag.
3. Thunder Polish – Polished Product
Thunder Trucks is one of the best names in the skateboarding market consistently providing high-quality and dependable trucks. It’s reasonably priced and is lightweight without losing any durability.
- Quick response
- Strong and light design
- Makes quicker turns and has faster reactions
- Guaranteed against any defects
- Polished design
- High profile
- Set of 2 Trucks
It is an overall good product, but newer options are better.
4. Venture 5.0” – Description
The Venture Trucks Polished Hi 5.0” is an assurance for great performance. They were designed for a solid, smooth ride. They are light and sturdy with an uncompromised style. The clean, polished look matches any board.
- #1 selling truck in the world
- 100% factory guaranteed
- Made in the USA
- Venture size 5.0 Hi
- 7.6” axle fitting boards between 7.4” and 7.875”
- Height of 53.5mm
- Hanger is 127mm
The Venture Polished Hi 5.0” trucks are a good deal but nothing remarkable.
5. Independent Raw Stage 11 129mm – Great For All Types of Skateboards
The Independent Raw Stage 11 trucks are great for any kind of skateboard. They are durable and perform well. They are made to last longer than any truck on the market.
- Set of 2
- Aluminum hanger and baseplate
- Solid steel axle
- Grade 8 kingpin
- Superior turns and stability
- Better grind clearance
- For decks between 7.4” and 8”
This is yet another great product from Independent.
6. Krux 5.0 – World’s Best Cushions
The Krux 5.0 is perfect for streets and parks. They have the world’s best cushions and already feel broken in from the beginning.
- Used with 8.3” to 9” decks
- 8.5” axle
- Lightweight hanger
- Design that decreases board breakage
- World’s best cushions
- Smooth grinds
- Great turning
The Krux Trucks is a good deal and a quality product.
7. Tracker Slalom RTS – Hand Assembled Rear Traction Truck
The Tracker Slalom RTS trucks are a more modern version of the original Tracker FulTracks. This model has a full contact pivot point for added stability. The RaceTrack-S was designed as a rear traction truck that provides stability and an increase in rider control. They are hand assembled using hourglass bottom cushions, a top cushion that’s taller, and a kingpin that is slightly longer for fine tuning.
- 161 mm truck
- Full contact pivot point for added stability
- For use as a rear traction truck
- Single truck
- Custom offset limited edition
- Part of a two piece combination with the RTX
- Offset axle option
If downhill slalom is your thing, this is the right choice.
8. Independent Skateboard Stage 11 Trucks – Cheap With Added Features
The Independent Skateboard Stage 11 Trucks helps you to add excitement and find adventure no matter where you’re like takes you. They are makers of quality products that have great graphics, innovative new composite materials, and natural finishes.
- Set of 2
- Adjustable double-barrel layered bushings
- Sturdy design
- Precision fit
- Mounting holes are short-pattern
- For size 8 decks
- Two speed-washers on axle mounts
Good for a beginner building their first board.
9. Tensor Truck Package – All-in-one Package
The Tensor Truck Package includes a few extras that will save you some money. Tensor 5.0 Mid Trucks in orange and white, white wheels measuring 52mm, Bullseye ABEC 9 Wheel Bearings, and Shorty’s 1” Hardware are all included in this package. The company was started in 1999, and the products are designed by Rodney Mullen.
- Tensor 5.0 mid trucks
- 52mm wheels in white
- Bullseye ABEC 9 wheel bearings
- Shorty’s 1” hardware
- Designed by Rodney Mullen
- Addresses the technical needs of skateboarders today
- 25% lighter that the industry’s standard
If you are about to buy all of these products separately, you can save some money with this package.
10. Owlsome Combo Set – The Complete Package
The Owlsome combo set comes with everything at a cheaper price that it would be to buy them all separately. The package includes trucks, wheels, bearings, riser pads, hardware, and spacers. The products have a quick response, are designed to be lightweight, and have unmatched levels of strength and control.
- Owlsome aluminum trucks
- 5.0” hanger
- Carson Steel 7.75” axle
- 95a black bushings
- 99a skateboard wheels 52mm x 31mm
- 1/8” riser pads and 1.0” hardware
- Owlsome Precision ABEC 7 wheel bearings
Best Skateboard Trucks – Buyers Guide
You can’t just buy any trucks and hope that they fit the rest of the parts of your board. You should also be aware of how adjustments to your trucks will affect your overall performance.
Choosing the Right Skateboard Truck Size
Your truck’s width directly corresponds to your deck’s width. Having trucks that are too narrow causes your board to become more unstable. The setup that’s most commonly found is for the truck to be about the same width as the deck which offers the most stability. Go with trucks that are equal or about 1/4” over or under the width of the deck. Heavier skateboarders like to have a wider deck and need trucks that are also set wider. You will have to find the right width for you through some trial and error.
Your truck’s size is measured by either the hanger’s width or the axle’s width. Make sure you read the truck’s specs to find out which measurement is used so you can buy the right size trucks for your board. This width determines how far your wheels are apart and affects your board’s performance. Different truck widths suit certain riding’s styles.
Some companies that produce trucks have their own sizing systems that can make figuring out which size you need hard. On this page there is a table showing many different brands, the sizing system they use, and deck size that they will work with.
Choosing a Skateboard Truck’s Profile
A truck’s profile is the distance between the bottom of the skate deck and the hanger. Most skateboarders prefer mid-sized trucks, but high or low trucks can be substituted depending on the skater’s style.
- Low Trucks: Low profile trucks are used with smaller wheels to provide added stability for certain tricks, like flips. They have a shortened kingpin used to provide more clearance, sits you closer tot he ground and helps stabilize the truck. Low trucks allow for your pushes and kicks to go further. Use 50-53mm wheels with low profile trucks.
- Mid-sized Trucks: These are a solid pick for skateboarding in a park or on the street. Use 53-56mm wheels with mid-sized trucks.
- High Trucks: Perfect for large wheels, high trucks work well on a cruiser or longboard because they are made to carve and cruise streets. A longer kingpin is used allowing for a greater turning radius and greater clearance between the axle and deck. Use 56mm wheels or larger with high trucks.
I want to share with you anything you need know about skateboard trucks. This information should aid you in understanding what is included in the reviews.
Customizing and Adjusting Your Skateboard’s Trucks
The size and type of trucks you pick changes your stability and the tricks you can perform on your skateboard. Choosing the right skateboard trucks and maintaining them is also key if you want to avoid wheel bite. Wheel bite is when your skateboard’s wheels rub against the deck and cause a stop on impact when you turn or do a trick.
Your trucks can easily adjust to execute tighter turns and tricks on your board. Also, if you choose softer bushing, you will turn easier, and if you choose hard bushings, your turns will be stiffer. How tight or how loose you set your trucks depends on how you skate.
What Trucks Are Made Out Of
How a truck is constructed and what material it is made out of will affect how a board rides, grinds, and flips. The truck’s hanger and baseplate are usually made with aluminum, and the axle is usually made with steel. There are some brands that offer other types of materials, however. It’s also possible to find solid and lighter hollow versions of certain materials.
Here are some of the common materials that you can find trucks being made out of:
Parts of a Skateboard Truck
Several main components make up a skateboard truck. The following are all the parts that they are made up of and some general information about each.
- Hanger. The hanger is the largest part of a truck. It is a triangular metal piece that supports the axle that runs through it and has the wheels attached on either side. The hanger makes direct contact with curbs and rails when you grind on them, so it must be durable.
- Baseplate. The baseplate is the truck’s flat part that mounts onto the skateboard’s deck. Either four or six holes are drilled in the baseplate to match up with your deck’s insert holes.
- Bushings. The bushings are soft urethane rings that fit around the kingpin to let the board pivot and turn smoothly. They provide cushioning support between the parts of the truck. Each truck has two bushings that come in different degrees of hardness. Bushings that are harder offer added resistance to the rider’s input. Bushings that are softer offer more response while turning.
Bushings can also have different sizes. Many are universal fitting most trucks, but some are specifically for either high or low trucks. Companies that make bushings usually list if their products are specific to size, so when you’re shopping make sure to read the product descriptions and ask if you are in doubt.
- Kingpin. The kingpin is a big bolt that functions as a backbone holding the truck’s parts together. It runs in the center of the truck and connects the hanger, the baseplate, and the bushings to it. Depending on the hardness of your bushings, the tightness of the kingpin will vary. A kingpin that is screwed more tightly causes resistance when you turn. By loosening the kingpin, you’ll allow for easier turns.
- Pivot Cup. The pivot cup is the rounded part at the base of the truck that fits into the baseplate. It’s a small plastic piece that keeps the trucks steady. When this part becomes worn, the truck can become unstable. Keep an eye on it and replace it when necessary.I hope that this buyers guide and these reviews were able to help you figure out what you are looking for in skateboard trucks. There are many options available and so many ways to customize your board. Find the trucks that are a good fit for you and your board and keep on riding.